|
 |
| Home >> Product & Solution >> Hydro Power Equipment >> |
|
|
 Hydro generator |
The character of the generator in our company
1.High quality cold stator core with new type F insullace
It has small contraction degree,strong hardness and stability of contraction in short time.It can prevent the generator from lossening after running for long time.and it also gets the standard of environment conservation.
2.The compacted strrcture of stator core acetabuliform spring
It can assure that the stator core can be packed strongly,also prevent the core from loosening after running for long time.
3.The insulative structure of close type pole coil
The function is so dependable,that it will ensure the pole against pollution during the transportation,assemblage and operation, and it can enhance the insulation life.
4.The elastic supporting in bulb unit
The structure of thurst bearing is elastic disk or rubber mat,the structure is simpleness,and it is no need to adjust the force of tile during assembling. |
|
|
| |
Lifting the stator of
bulb turbine rated 24MW |
| |
|
|
|
| Lifting the rotor of Ø5.44m diameter |
Lifting the stator |
| |
|
|
5.The eauipment averting the axial electric current in bulb unit
Depositing the insulated shim and testing shim in proper place,it can avoid and inspect the axial current.
6.The equipment averting the axial current in vertical unit
We divide the thrust collar into two parts,the inner ring and the thrust runner,and lay insullac between them.The structure is simple,and no need to locate in site.
7.Preventing oil fog equipment of bearing in vertical unit
According to the rotate speed and the pressure dispersion of outer and inner air,we place the suitable preventing oil fog mace,cooperated with the appropriate pressure air current inducted from the the wind room and the oil fog mace,it can prevent the oil fog from over flowing effectively and dispel the pollution of the generator. |
|
|
|
|
|
| Lifting the rotor of Ø3.3m diameter |
The rolling coils |
The slate coils |
| |
|
|
|
|
|
Manufacturing the main shaft
of
high speed unit |
The rotor poles |
Thrust bearing plastic segments |
| |
|
|
|
